Newsletter
  


Spill Barriers

General

Spill barriers are used for quick locking and blocking of building apertures to prevent uncontrolled spilling of water-hazardous substances in case of an emergency in example spillage of contaminated fire water from burning buildings.
Basically IBS Spill Barriers consist of two components:

  • End Posts
  • Barrier

A special invert frame is not required. The special invert seal is extremely flexible and adjusts ground unevenness of approx. 15 mm.

The barrier installed quick clamps ensure the fast installation of the barrier in case of emergency.
Flow Control Systems


Spill Barrier stackable


Spill Barrier stackable with mobile Posts
Flow Control Systems
End Posts and Barriers are powder coated extruded Aluminum profiles type EN AW 6063. The invert seal is EPDM. All remaining components are galvanized mild steel.
End Post mounting variations include channel rebate, channel sidewall and wall mounted on and off seating. Special end post mounting such as angled solutions are available upon request. For wider apertures mobile posts or additional braces can be provided.

If desired storage frames, bumpers, steel frames etc. can be provided.
ll IBS spill barriers are produced acc. to VDS Guideline 2564-1 and labelled with the LGA label "Tested and Monitored Design".
Besides stackable spill barriers the following standard models are available. Additionally IBS have developed for rotational, height adjustable and swayable barriers an automatic barrier type.

Flow Control Systems
Spill Barrier, rotational

Available as

  • Manual Barrier
  • Automatic Barrier

Flow Control Systems
Spill Barrier, rotational & foldable

Available as
  • Manual Barrier

Flow Control Systems
Spill Barrier, two –sided rotational

Available as
  • Manual Barrier

Flow Control Systems
Spill Barrier, height adjustable

Available as
  • Manual Barrier
  • Automatic Barrier

Flow Control Systems
Spill Barrier, swayable

Available as
  • Manual Barrier
  • Automatic Barrier
Please contact us either by phone or email to discuss your particular requirements and we will be happy to help.




We are very gladly available to you for possible questions!

IBS Engineered Products Ltd
Registered Office: 55 King Street
Manchester M24LQ
info@ibsengineeredproducts.com, www.ibsengineeresproducts.co.uk
Registered in England and Wales | Registration Number: 6818580 | VAT Registration Number: 975 5934 62

IBS Engineered Products Limited
Unit 7 Brunel Park
Off Blyth Road
Harworth
Doncaster
South Yorkshire
DN11 8NE
Phone: + 44 1302 6300-15
Fax:      +44 1302 6300-14
info@ibsengineeredproducts.com
Registered Office:
55 King Street
Manchester M24LQ
Registered in England and Wales
Registration No.: 6818580